XLR Microphone Cables Ireland – Professional Mic & XLR Audio Cables

Shop XLR microphone cables in Ireland at DJBox.ie for live sound, DJs, bands, studios, venues, podcasting and professional audio systems. Our Mic/XLR Cables range includes balanced XLR microphone leads, XLR-to-jack cables, XLR splitters and other useful XLR audio connections in a choice of lengths and configurations.

Whether you're connecting a wired microphone to a mixer, running balanced audio between professional equipment or replacing cables in a live sound system, DJBox.ie supplies microphone cables and XLR audio cables for home, mobile and professional applications.

Shop XLR Cables in Ireland

XLR is one of the most widely used connection types in professional audio. Three-pin XLR connectors are commonly found on microphones, mixers, active PA speakers, audio interfaces, processors and other professional sound equipment.

This collection focuses on microphone and XLR-based audio cables. For RCA, jack, mini-jack and other general audio interconnects, browse our audio signal cables.

XLR Microphone Cables

A conventional XLR microphone cable normally uses a female 3-pin XLR connector at the microphone end and a male 3-pin XLR connector at the mixer, audio interface or other compatible input.

This is the standard connection used by a huge range of professional wired microphones and is commonly found in live sound, recording studios, venues, churches, schools, production companies and event systems.

Browse our wired microphones if you're building a complete microphone setup.

Balanced XLR Cables

Balanced XLR cables are widely used in professional audio because a properly balanced connection is designed to reject interference picked up along the cable run.

For the connection to operate as intended, the equipment at both ends must support the appropriate balanced signal configuration.

This makes balanced XLR particularly useful for microphones, mixers, active speakers and other professional audio equipment where reliable signal connections are important.

XLR Male to XLR Female Cables

A male XLR to female XLR cable is the familiar configuration used for many microphone and professional audio connections.

The female connector commonly connects to the microphone or male output, while the male connector connects to a compatible female input.

Always check the connections on your equipment before ordering, particularly when connecting equipment other than conventional microphones.

XLR to Jack Cables

XLR-to-jack cables are useful when compatible professional audio equipment uses an XLR connection at one end and a 6.35mm jack connection at the other.

Our live range includes XLR-to-stereo-jack and XLR-to-mono-jack configurations for different audio applications.

It is important to check whether the required connection is balanced or unbalanced. The fact that two connectors physically fit the equipment does not automatically mean they carry the same signal format.

Balanced XLR to TRS Jack Cables

A suitable XLR-to-TRS cable can be used between compatible equipment providing balanced XLR and balanced 6.35mm TRS connections.

This type of cable can be useful for connecting mixers, audio interfaces, processors, active speakers and other professional audio equipment with different connector formats.

Check the input and output specification of both devices before choosing the cable.

XLR to Mono Jack Cables

Selected equipment may require an XLR-to-TS or mono-jack connection. These connections can operate differently from balanced XLR-to-TRS cables, so it is important to select the correct configuration for the equipment.

If you're unsure, contact DJBox.ie with the make and model of both devices before ordering.

RCA to XLR Cables

This collection also includes selected RCA-to-XLR cables for applications where equipment with an RCA connection needs to connect to compatible XLR-equipped hardware.

Changing the physical connector does not automatically convert an unbalanced signal into a balanced signal, so always check the requirements of the equipment at both ends.

XLR Splitter Cables

XLR splitter cables provide multiple XLR connections from a suitable source or destination depending on the cable configuration.

Our range includes both one-male-to-two-female and one-female-to-two-male XLR configurations.

Splitter cables should only be used where appropriate for the particular audio application. They do not perform the same function as an active signal distribution system, microphone splitter or mixer.

XLR Cables for Live Microphones

For singers, bands and performers, an XLR microphone lead is one of the fundamental connections in a live sound system.

The cable normally carries the microphone signal from a compatible wired microphone to a mixer, stage box, audio interface or other microphone input.

When choosing cables for live performance, consider the required length, connector quality and how frequently the cable will be set up, packed away and transported.

XLR Cables for Mixers

Professional mixers commonly use XLR connections for microphone inputs and selected audio outputs.

Depending on the mixer, XLR cables may therefore be used both for connecting microphones and for sending balanced audio from the mixer to active speakers, processors or other equipment.

Browse our audio mixers for live sound, venue and professional audio applications.

XLR Cables for Active PA Speakers

Many professional active PA speakers accept balanced XLR signals from mixers, DJ equipment and other compatible audio sources.

Using the appropriate balanced output and input connections can provide a practical way to run audio between equipment, particularly over longer cable routes encountered in venues and live sound systems.

XLR Cables for Audio Interfaces

Audio interfaces commonly provide XLR or combination inputs for recording microphones into a computer-based studio setup.

A suitable XLR microphone cable can connect a compatible dynamic or condenser microphone to the interface. If your microphone requires phantom power, check that the interface provides the appropriate power and that all equipment is being used according to the manufacturer's instructions.

Explore our audio interfaces for recording and music-production setups.

XLR Cables for DJs

Professional DJ equipment can use XLR connections for master audio outputs, while active PA speakers and professional sound systems commonly provide compatible balanced inputs.

The exact connections vary between controllers, mixers and standalone DJ systems, so check your equipment before ordering.

Browse our DJ equipment if you're building or upgrading a complete DJ system.

XLR Cables for Studios

Recording studios use XLR connections extensively for microphones and other compatible professional audio equipment.

Choosing appropriate cable lengths can help keep a studio organised while avoiding unnecessary excess cable around microphone stands, desks and recording spaces.

XLR Cables for Podcasting

Many professional podcast microphones use conventional XLR connections and require an audio interface, podcast mixer or other suitable microphone preamp.

A standard XLR microphone lead can connect the microphone to compatible recording equipment, making it an essential part of many podcast setups.

For additional mounting equipment, browse our microphone stands.

What Length XLR Cable Do I Need?

Choose a cable long enough to reach comfortably between equipment while allowing for safe routing around stands, stages and workspaces.

A studio microphone may only require a relatively short cable, while live sound systems can require considerably longer runs between stage equipment and other audio hardware.

Avoid buying substantially more cable than you need, as excessive cable can make setups harder to keep tidy.

Can XLR Cables Carry Phantom Power?

A correctly wired standard 3-pin XLR microphone connection is commonly used to deliver phantom power from compatible microphone preamps to condenser microphones that require it.

Phantom power should only be used with equipment designed for the relevant connection and operating conditions. Follow the microphone and mixer or interface manufacturer's instructions.

Are All XLR Cables Balanced?

An XLR connector does not automatically guarantee that the complete signal path is balanced.

A standard correctly wired 3-pin XLR cable is commonly used for balanced analogue audio, but the actual signal configuration depends on the equipment and wiring at both ends.

This is particularly important when using adapter cables that change from XLR to RCA or mono jack connections.

Is XLR Better Than Jack?

Neither connector is automatically better in every application. XLR and TRS jack connections can both carry balanced professional audio when the equipment supports it.

XLR connectors are particularly common for microphones and professional PA systems, while TRS connections are also widely used on mixers, audio interfaces and studio equipment.

The best connection is normally the appropriate connection supported by the equipment you are using.

XLR Cable vs DMX Cable

Audio XLR cables and DMX lighting cables can use similar-looking connectors, but they are designed for different applications.

DMX carries digital lighting-control data and should use suitable cable designed for DMX applications rather than ordinary microphone cable.

For lighting systems, browse our DMX cables.

Microphone Cable vs Speaker Cable

A microphone or XLR signal cable and a speaker cable perform different jobs.

An XLR microphone cable carries a relatively low-level audio signal between compatible equipment. A speaker cable is designed to carry amplified power from an amplifier to a passive loudspeaker.

Do not treat the two as interchangeable.

For passive speaker systems, browse our speaker cables.

Choosing the Right XLR Cable

Before ordering, check:

• Connector Type – XLR-to-XLR, XLR-to-TRS, XLR-to-TS or another configuration.
• Male & Female Connections – Check the connector gender required at each end.
• Balanced or Unbalanced Signal – Confirm the connection type supported by your equipment.
• Cable Length – Allow enough length for practical and safe routing.
• Application – Microphone, mixer, PA speaker, audio interface, studio or other professional audio equipment.
• Equipment Compatibility – Check the specifications of both devices being connected.

If you're unsure which XLR cable you need, contact DJBox.ie with the exact make and model of the two devices you want to connect. Our team can help identify the appropriate cable.

Build a Complete Microphone & PA Setup

Combine the correct XLR cables with suitable microphones, stands, mixers and speakers to build a reliable live sound or recording system.

Explore our microphones, microphone stands, microphone accessories, audio mixers and active PA speakers.

Why Buy XLR & Microphone Cables from DJBox.ie?

DJBox.ie is an Irish-owned DJ and professional audio specialist supplying cables and sound equipment to DJs, musicians, venues, studios and event professionals throughout Ireland.

• XLR microphone cables in multiple lengths and configurations
• Balanced XLR audio cables
• XLR-to-jack and specialist XLR connections
• XLR splitter cables for appropriate applications
• Professional audio cable brands including DAP Audio and PD-Connex
• Expert advice on cable and equipment compatibility
• Fully stocked showroom in Tallaght, Dublin
• Nationwide delivery across Ireland
• Click & Collect available

Shop XLR microphone cables online at DJBox.ie, or visit our Tallaght, Dublin showroom for help finding the correct microphone lead, balanced XLR cable or audio connection for your equipment.

XLR Cable FAQs

What XLR cable do I need for a microphone?

Most conventional professional wired microphones use a female 3-pin XLR connection at the microphone end and a male 3-pin XLR connection at the mixer or audio interface end. Always check your exact equipment.

What is an XLR cable used for?

XLR cables are widely used to carry microphone and balanced line-level audio between compatible professional equipment such as microphones, mixers, active speakers and audio interfaces.

Are XLR cables balanced?

Standard correctly wired 3-pin XLR cables are commonly used for balanced analogue audio, but the complete connection is only balanced when the equipment and signal configuration at both ends support balanced operation.

Can an XLR cable carry phantom power?

Yes. Standard XLR microphone connections are commonly used to provide phantom power from compatible microphone preamps to condenser microphones that require it.

Can I connect XLR to a jack input?

Yes, where the equipment is compatible and the correct XLR-to-jack cable is used. Check whether you require a balanced TRS or another type of connection before ordering.

Can I connect a microphone directly to an active speaker?

Only if the speaker provides a suitable microphone-level input and the manufacturer supports that application. Many active speaker XLR inputs can also be designed for line-level signals, so check the exact speaker specification.

Can I use a microphone XLR cable for DMX lighting?

Dedicated DMX cable is the appropriate choice for DMX lighting-control signals. Similar-looking XLR connectors do not mean audio and DMX cables are designed for the same application.

Where can I buy XLR microphone cables in Ireland?

DJBox.ie supplies XLR microphone cables throughout Ireland for live sound, DJs, studios, bands and professional audio systems, with nationwide delivery and Click & Collect from our Tallaght, Dublin showroom.